Free Shipping With Orders $55+
EXTRA 15% OFF ANY ORDER — USE: WOW15
07:06:55:08

days hours min sec

LEFT FOR MEMORIAL DAY SALE
SAVE UP TO 85%

0Ogusta

SDR Transceiver and Receiver Switch Antenna Sharer TR Switch Box with Gas Discharge Protection 160MHz

4.6504

$36.99 / $45.13

*Name:
*Email:
*Phone:
*Quantity:
*Content:
Attachment:

Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$31.99 / $45.13

Shipping to: United States | Express delivery: 7-12 business days | Standard delivery: 15-25 business days

location

Ejogua ko'ág̃a Embojuaju carrito-pe

Tarjeta crédito térã débito

Oñemo'ã porãva

Jopói libre

Jopói libre oĩjeyvéva ejogua vove

Mba'e rembosa'irã

Mba'e rembosa'irã libre $9.9 rire

Mba'e devolución rehegua

Oñemoneĩ devolución 40 ára peve og̃uahẽ rire. Jopói personalizado ndojejapói devolución. Jopói ejogua cupón ndive oñemoneĩ cambio añoite.

Jopói libre

Eg̃uahẽ porã Roymall-pe, ne renda jopói porã joguápe. Rohechakuaa ha roaguyje ne pytyvõ, ha roñe'ẽ aguyje jopói libre ndive. Ejogua vove, rejoguáta mba'eporã porã ha reñemomba'e jopói libre ndive. Eheka ore apopyrã ha ejuhu ne jopói perfecto.

Mba'e rembosa'irã

Rojapo tembiapo rembosa'irã 2 ára peve.Ára sapy'agua oñemboare 2 ára.Oñemboare 5-7 ára mba'apo (Lunes a Viernes).Oñemboare sapy'a tetã ambuéva rupi.

1. Devolución ha cambio

Roñemoneĩ devolución Roymall-gui añoite. Jopói libre ndojejapói devolución. Ejapo devolución oimeraẽva jopói ojeipurúva'ỹre.Roñemoneĩ devolución 3-5 ára mba'apo peve.Jopói personalizado ndojejapói devolución.Eñe'ẽ ore ndive. service@roymall.com térã Whatsapp: +8619359849471

2.Devuelta

Reguereko devuelta oimeraẽva jopói ojeipurúva'ỹre. Mba'e rembosa'irã ndojejapói devuelta.Eñe'ẽ ore ndive. service@roymall.com térã Whatsapp: +8619359849471

Specification:

Impedance: 50u03a9

Frequency range: DC -160MHz

Maximum TX power: 100W

RF sense threshold:<10mW (1.8MHz-30MHz tested)

ON time: < 20ms / Release time: < 190ms

Insertion loss: < 0.3dB @ 144MHz (0.2dB typical)

RX isolation: > 38dB @ 144MHz (40dB typical)

Gas discharge protection

Power supply: 13.8V DC 200mA

Weight: 430g

Size: 126*119*52MM

>>>Manual: Click here to open<<<

How to use one antenna at the same time for the radio and SDR:

1. This sharer is a shared antenna between the radio and the SDR. After receiving the goods, open the box, remove the "jumper" in the middle, and change it to an automatic control state, that is: when the radio is transmitting, the SDR receiving channel is automatically closed, and the radio When not transmitting, the radio receives the signal together with the SDR.

2. The jacks in front of the panel do not need to be wired, and the distributed PTT line does not need to be connected.

3. The rear jacks correspond to the power supply (VDC) interface, the radio (RADIO) interface, the SDR interface, and the antenna (ANTENNA) interface, respectively, and connect to the feeder according to each interface.

4. It is recommended to use the feeder with good shielding performance and cover it with a magnetic ring.

5. It is recommended that the sharer and the radio shell be grounded, because the radio may interfere with the SDR when transmitting.

6. After removing the jumper in the box, it is normal that the TRXlight on the panel is always on red; when the radio is not transmitting, the SDR on the panel is green and it is in normal working state; when the radio is transmitting, the SDR light on the panel will be off, and the SSB will follow the idea of communication. It is normal for the sound to change, the indicator light to flash and the relay to make a sound.

Package included:

1 x Host

1 x Power cord

1 x 3.60cm SMA to SMA connecting line

1 x PTT control line

Ejogua Paypal ndive

Products related to this item

Loading related products...

❮

❯

Videos for similar product

Loading product videos...

❮

❯

Electronics Ranking

More Electronics

SDR Transceiver and Receiver Switch Antenna Sharer TR Switch Box with Gas Discharge Protection 160MHz

Customer Reviews

4.60 out of 5

See all 82 reviews

5 star

2 (100%)
4 star

0 (0%)
3 star

0 (0%)
2 star

0 (0%)
1 star

0 (0%)

Write a Review Get double review points if you are one of the first 3 reviews published!

All Reviews (82)
Image ( 2 )
Video (0)
All Star
- All Star(82)
- 5 Star (2)
- 4 Star (0)
- 3 Star (0)
- 2 Star (0)
- 1 Star (0)

Sort by:

Top Review

Top Review
Most Helpful
Most Recent

Reviews only from your country (United States)

Show Original

A part of the review has been auto-translated.

MattyMiller VIP4
GB
20/02/2021

This is a very good panadapter switch so you can use your HF antenna (or upto 160Mhz) with your radio and your SDR receiver at the same time. This allows me to view a wide live bandscope on my computer using SDRUno and control the HF radio via Omnirig. To see this in action please search YouTube for Tech Minds.

This is a very good panadapter switch so you can use your HF antenna (or upto 160Mhz) with your radio and your SDR receiver at the same time. This allows me to view a wide live bandscope on my computer using SDRUno and control the HF radio via Omnirig. To see this in action please search YouTube for Tech Minds.

This is a very good panadapter switch so you can use your HF antenna (or upto 160Mhz) with your radio and your SDR receiver at the same time. This allows me to view a wide live bandscope on my computer using SDRUno and control the HF radio via Omnirig. To see this in action please search YouTube for Tech Minds.
Rotate left Rotate right
20

Comments (7)

Show Original
BG481155725 VIP1
US
02/01/2022

arrived in about a week I moved the internal jumper to share the antenna. The device works perfectly. Sharing my DX Commander antenna with my Icom 706 transceiver and my SDRplay2. Now I have a waterfall display while using my old 706. Recommend this SDR Switch.

arrived in about a week I moved the internal jumper to share the antenna. The device works perfectly. Sharing my DX Commander antenna with my Icom 706 transceiver and my SDRplay2. Now I have a waterfall display while using my old 706. Recommend this SDR Switch.

arrived in about a week I moved the internal jumper to share the antenna. The device works perfectly. Sharing my DX Commander antenna with my Icom 706 transceiver and my SDRplay2. Now I have a waterfall display while using my old 706. Recommend this SDR Switch.
Rotate left Rotate right
8

Comments (0)

Show Original

Show:

12...30

Total 0 pages

Go to page

Customer Q&As

Searching for relevant results...

Can't find your answer? Ask a new questionorCustomer Service

Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.

showing 1-27 of 27 |

Show Original

A part of the QA has been auto-translated.

0

Q:
The details sections says 100W output, but that's not possible with a power supply of 13.8V/200mA. Can anyone shed light on this?

The details sections says 100W output, but that's not possible with a power supply of 13.8V/200mA. Can anyone shed light on this?
The details sections says 100W output, but that's not possible with a power supply of 13.8V/200mA. Can anyone shed light on this?

A:

It is 100W THROUGHPUT. 100W from transceiver out into the adapter and same 100W out to the antenna. Power supply (12V 200mA) only for internal circuitry (relay, switch, whatever is inside) 100W means you can not use with linear amplifier (500W-1kW)

It is 100W THROUGHPUT. 100W from transceiver out into the adapter and same 100W out to the antenna. Power supply (12V 200mA) only for internal circuitry (relay, switch, whatever is inside) 100W means you can not use with linear amplifier (500W-1kW)

Answered by es2dc on 13/04/2021Helpful (0)
0

Q:
The Specification is DC-160mhz. My unit will NOT perform above 50mhz -VERY high SWR.?

The Specification is DC-160mhz. My unit will NOT perform above 50mhz -VERY high SWR.?
The Specification is DC-160mhz. My unit will NOT perform above 50mhz -VERY high SWR.?

A:

sameas mine

sameas mine

Answered by tony60abw on 21/03/2021Helpful (0)
0

Q:
its a little bit fast (relays ar clicking on and off) on usb/lsb, have some one solved this? my transceiver is about 20watts.

its a little bit fast (relays ar clicking on and off) on usb/lsb, have some one solved this? my transceiver is about 20watts.
its a little bit fast (relays ar clicking on and off) on usb/lsb, have some one solved this? my transceiver is about 20watts.

A:

trychanging internal jumper, if radio has a ppt socket 2x3.5mm plug it in both terminals the it switches as soon as you key

trychanging internal jumper, if radio has a ppt socket 2x3.5mm plug it in both terminals the it switches as soon as you key

Answered by SIFFLER on 24/01/2025Helpful (0)
0

Q:
Received my switch. When hooked up as required, I get a strong antenna signal at my SDR, but no antenna signal at the radio? I have tried two different coax patch cables from the switch to the radio with same results. Not just a bad signal, NO signal at the radio.

Received my switch. When hooked up as required, I get a strong antenna signal at my SDR, but no antenna signal at the radio? I have tried two different coax patch cables from the switch to the radio with same results. Not just a bad signal, NO signal at the radio.
Received my switch. When hooked up as required, I get a strong antenna signal at my SDR, but no antenna signal at the radio? I have tried two different coax patch cables from the switch to the radio with same results. Not just a bad signal, NO signal at the radio.

A:

internaljumper needs changed, see techminds how to,

internaljumper needs changed, see techminds how to

Answered by SIFFLER on 29/04/2024Helpful (0)
0

Q:
Hello, i connected the switch today but get interference of broadcast/sw radio. how can that be resolved?

Hello, i connected the switch today but get interference of broadcast/sw radio. how can that be resolved?
Hello, i connected the switch today but get interference of broadcast/sw radio. how can that be resolved?

A:

Use a filter for interference , as the unit is only for displaying your tx through an SDR program, including.. Seeing other hams tx signals on the band, by use of your SDR programmes waterfall. And what ever you wish to qrp or not, the HF band your wanting to chase, including , monitoring your own TX, for other purposes.

Use a filter for interference , as the unit is only for displaying your tx through an SDR program, including.. Seeing other hams tx signals on the band, by use of your SDR programmes waterfall. And what ever you wish to qrp or not, the HF band your wanting to chase, including , monitoring your own TX, for other purposes.

Answered by B on 11/04/2022Helpful (0)
0

Q:
The device is working fine. I purchased it a few months back. But, I would like to learn more about the function and purpose of the three additional 3.5 mm jacks located on the opposite side of the device from where the two PL259 and SMA connections are located. The jacks are Labeled: J1 TRX, J2 AUDIO OUT, J3 SDR. Is there any available documentation which has the descriptions of these jacks? Best Regards, Thank You

The device is working fine. I purchased it a few months back. But, I would like to learn more about the function and purpose of the three additional 3.5 mm jacks located on the opposite side of the device from where the two PL259 and SMA connections are located. The jacks are Labeled: J1 TRX, J2 AUDIO OUT, J3 SDR. Is there any available documentation which has the descriptions of these jacks? Best Regards, Thank You
The device is working fine. I purchased it a few months back. But, I would like to learn more about the function and purpose of the three additional 3.5 mm jacks located on the opposite side of the device from where the two PL259 and SMA connections are located. The jacks are Labeled: J1 TRX, J2 AUDIO OUT, J3 SDR. Is there any available documentation which has the descriptions of these jacks? Best Regards, Thank You

A:

Hi the j1 trx is for a mic keyed switch. J2 is for an external speaker. SDR is to connect a software defined radio (basically your computer).

Hi the j1 trx is for a mic keyed switch. J2 is for an external speaker. SDR is to connect a software defined radio (basically your computer).

Answered by BG164717354 on 17/10/2021Helpful (0)
0

Q:
How does it work with ic-7100 icom

How does it work with ic-7100 icom
How does it work with ic-7100 icom

A:

it has a rf sensing relay, but if not sure use the ptt jack off the radio

it has a rf sensing relay, but if not sure use the ptt jack off the radio

Answered by SIFFLER on 13/06/2021Helpful (0)
0

Q:
Hi, is possible connect adaptor 12 volt ?

Hi, is possible connect adaptor 12 volt ?
Hi, is possible connect adaptor 12 volt ?

A:

12V should be fine. It's close enough to 13.8V to still operate. It's probably a 12V circuit and just shown as 13.8V because that's the most common voltage used to power transceivers.

12V should be fine. It's close enough to 13.8V to still operate. It's probably a 12V circuit and just shown as 13.8V because that's the most common voltage used to power transceivers.

Answered by BG101216243 on 17/07/2021Helpful (0)
0

Q:
Is there some user/instruction manual available for this switching box please.... I am getting loads of feedback between my sdr and the radio when I try transmitting and also the relay is clicking like mad between tx to sdr when trying to transmit on ssb

Is there some user/instruction manual available for this switching box please.... I am getting loads of feedback between my sdr and the radio when I try transmitting and also the relay is clicking like mad between tx to sdr when trying to transmit on ssb
Is there some user/instruction manual available for this switching box please.... I am getting loads of feedback between my sdr and the radio when I try transmitting and also the relay is clicking like mad between tx to sdr when trying to transmit on ssb

A:

yes, you will find it from the description. >>>Manual: Click here to open<<

yes, you will find it from the description.

Answered by Visionswas on 11/07/2024Helpful (0)
0

Q:
When the unit is not powered up, the antenna is connected to the radio correct jQuery111306306789973188458_1717673554388

When the unit is not powered up, the antenna is connected to the radio correct jQuery111306306789973188458_1717673554388
When the unit is not powered up, the antenna is connected to the radio correct jQuery111306306789973188458_1717673554388

A:

You can check the manual from the description.

You can check the manual from the description.

Answered by Procyonine on 11/06/2024Helpful (0)
0

Q:
personally, I have a very bad experience with it. The seller declares use up to 160Mhz and that is misleading the customer. .It is usable up to 30 MHz, but for example already at 144 MHz it has an SWR of 1:10 !! and that is unacceptable

personally, I have a very bad experience with it. The seller declares use up to 160Mhz and that is misleading the customer. .It is usable up to 30 MHz, but for example already at 144 MHz it has an SWR of 1:10 !! and that is unacceptable
personally, I have a very bad experience with it. The seller declares use up to 160Mhz and that is misleading the customer. .It is usable up to 30 MHz, but for example already at 144 MHz it has an SWR of 1:10 !! and that is unacceptable

A:

yes, you should check the manual first.

yes, you should check the manual first.

Answered by Myoxine on 06/05/2024Helpful (0)
0

Q:
When I turn on the power on this device on the HF radio and SDR there is no signal. But at the VHF/UHF frequency when the power is turned on the radio there is radio signal and sound. Where's the problem ?

When I turn on the power on this device on the HF radio and SDR there is no signal. But at the VHF/UHF frequency when the power is turned on the radio there is radio signal and sound. Where's the problem ?
When I turn on the power on this device on the HF radio and SDR there is no signal. But at the VHF/UHF frequency when the power is turned on the radio there is radio signal and sound. Where's the problem ?

A:

My guess - VHF and UHF are nor filtered by switch and goes through while HF is filtered by internal circuit. Open your SDR switch and try to move short black jumper to other position then it is now. Hope this helps

My guess - VHF and UHF are nor filtered by switch and goes through while HF is filtered by internal circuit. Open your SDR switch and try to move short black jumper to other position then it is now. Hope this helps

Answered by LY4SA on 26/06/2023Helpful (0)
0

Q:
Dear Eric, Thanks for the reply but I was referring to the udated QRM Eliminator version with TX RED Indicator when PTT works. See Aliexpress please.

Dear Eric, Thanks for the reply but I was referring to the udated QRM Eliminator version with TX RED Indicator when PTT works. See Aliexpress please.
Dear Eric, Thanks for the reply but I was referring to the udated QRM Eliminator version with TX RED Indicator when PTT works. See Aliexpress please.

A:

maybe you can contact the customer service.

maybe you can contact the customer service.

Answered by Jaye on 20/07/2022Helpful (0)
0

Q:
When can you deliver the QRM Eliminator product, NEW II, the last version of 2022, with TX RED led indicator ?

When can you deliver the QRM Eliminator product, NEW II, the last version of 2022, with TX RED led indicator ?
When can you deliver the QRM Eliminator product, NEW II, the last version of 2022, with TX RED led indicator ?

A:

Do you mean this item?> https://www.banggood.com/QRM-Eliminator-X-Phase-(1-30-MHz)-HF-Bands-Box-p-1828030.html?rmmds=detail-topright-recommendation&cur_warehouse=CZ&trace_id=19ee1657942637045

Do you mean this item?> https://www.banggood.com/QRM-Eliminator-X-Phase-(1-30-MHz)-HF-Bands-Box-p-1828030.html?rmmds=detail-topright-recommendation&cur_warehouse=CZ&trace_id=19ee1657942637045

Answered by Eric on 15/07/2022Helpful (0)
0

Q:
I am not able to pass 100w on all bands. 10m is only 40w, 6m is 20w, and 2m is 5w. Am I doing something wrong? SWR is just fine.

I am not able to pass 100w on all bands. 10m is only 40w, 6m is 20w, and 2m is 5w. Am I doing something wrong? SWR is just fine.
I am not able to pass 100w on all bands. 10m is only 40w, 6m is 20w, and 2m is 5w. Am I doing something wrong? SWR is just fine.

A:

http://myosuploads3.banggood.com/products/20210614/20210614204848SDR.pdf

http://myosuploads3.banggood.com/products/20210614/20210614204848SDR.pdf

Answered by YeYIN on 17/06/2022Helpful (0)
0

Q:
when will item be sold from cz europe

when will item be sold from cz europe
when will item be sold from cz europe

A:

shipped from CN is also fast

shipped from CN is also fast

Answered by Kiwan on 06/05/2022Helpful (0)
0

Q:
There are no instructions how to connect the 3.5 mm jack to a Yaesu FT991A 8-pin DIN breakout cable Sandy. Please show wiring diagram or where in the instructions it can be found.

There are no instructions how to connect the 3.5 mm jack to a Yaesu FT991A 8-pin DIN breakout cable Sandy. Please show wiring diagram or where in the instructions it can be found.
There are no instructions how to connect the 3.5 mm jack to a Yaesu FT991A 8-pin DIN breakout cable Sandy. Please show wiring diagram or where in the instructions it can be found.

A:

http://myosuploads3.banggood.com/products/20210614/20210614204848SDR.pdf

http://myosuploads3.banggood.com/products/20210614/20210614204848SDR.pdf

Answered by Endos on 04/02/2022Helpful (0)
0

Q:
How do you wire the 3.5 mm ptt jack to a yaesu 991A 8 DIN breakout cable?

How do you wire the 3.5 mm ptt jack to a yaesu 991A 8 DIN breakout cable?
How do you wire the 3.5 mm ptt jack to a yaesu 991A 8 DIN breakout cable?

A:

check the instruction

check the instruction

Answered by Sandy on 01/02/2022Helpful (0)
0

Q:
It seems that safest thing to do is also connect the PTT lead, my PTT connection is a standard 3.5mm 2 terminal jack, I already have a 2 x 3.5mm jack lead could I use that rather than wire up the supplied lead with another 3.5mm jack?

It seems that safest thing to do is also connect the PTT lead, my PTT connection is a standard 3.5mm 2 terminal jack, I already have a 2 x 3.5mm jack lead could I use that rather than wire up the supplied lead with another 3.5mm jack?
It seems that safest thing to do is also connect the PTT lead, my PTT connection is a standard 3.5mm 2 terminal jack, I already have a 2 x 3.5mm jack lead could I use that rather than wire up the supplied lead with another 3.5mm jack?

A:

http://myosuploads3.banggood.com/products/20210407/20210407205257SDR.pdf

http://myosuploads3.banggood.com/products/20210407/20210407205257SDR.pdf

Answered by The seller on 13/12/2021Helpful (0)
0

Q:
Follow Up, About the 3 jacks: J1 SDR , J2 AUDIO, J3 TRX These jacks all appear to be 3.5 mm commonly used for speakers / audio. Question: Is J1 (SDR) jack for input of sound to the box? Question: Is J2 (AUDIO) for output of that signal to speakers? Question: Is J3 (TRX) for a switch to control signal from J1 to J2? Question: Are these Stereo (3 connections) on jack, or mono (2 connections)

Follow Up, About the 3 jacks: J1 SDR , J2 AUDIO, J3 TRX These jacks all appear to be 3.5 mm commonly used for speakers / audio. Question: Is J1 (SDR) jack for input of sound to the box? Question: Is J2 (AUDIO) for output of that signal to speakers? Question: Is J3 (TRX) for a switch to control signal from J1 to J2? Question: Are these Stereo (3 connections) on jack, or mono (2 connections)
Follow Up, About the 3 jacks: J1 SDR , J2 AUDIO, J3 TRX These jacks all appear to be 3.5 mm commonly used for speakers / audio. Question: Is J1 (SDR) jack for input of sound to the box? Question: Is J2 (AUDIO) for output of that signal to speakers? Question: Is J3 (TRX) for a switch to control signal from J1 to J2? Question: Are these Stereo (3 connections) on jack, or mono (2 connections)

A:

http://myosuploads3.banggood.com/products/20210407/20210407205257SDR.pdf

http://myosuploads3.banggood.com/products/20210407/20210407205257SDR.pdf

Answered by Visna on 19/10/2021Helpful (0)
0

Q:
Hello, I appreciate your answer regarding the purpose of the 3 jacks. But, I am confused by the answer. The SDR is connected to the USB port on the computer. The receive audio is created within the computer, and is routed directly to the speakers attached to the computer. I don't see how that audio signal could exist within the antenna switch. I mean the antenna connections PL259 in and PL259 out, and the SMA connection are not yet audio, until those signals have been processed by the SDR and computer, and the transceiver. So, perhaps one or more of the jacks are inputs for audio? Clarification would be appreciated. Best Regards, Thank you

Hello, I appreciate your answer regarding the purpose of the 3 jacks. But, I am confused by the answer. The SDR is connected to the USB port on the computer. The receive audio is created within the computer, and is routed directly to the speakers attached to the computer. I don't see how that audio signal could exist within the antenna switch. I mean the antenna connections PL259 in and PL259 out, and the SMA connection are not yet audio, until those signals have been processed by the SDR and computer, and the transceiver. So, perhaps one or more of the jacks are inputs for audio? Clarification would be appreciated. Best Regards, Thank you
Hello, I appreciate your answer regarding the purpose of the 3 jacks. But, I am confused by the answer. The SDR is connected to the USB port on the computer. The receive audio is created within the computer, and is routed directly to the speakers attached to the computer. I don't see how that audio signal could exist within the antenna switch. I mean the antenna connections PL259 in and PL259 out, and the SMA connection are not yet audio, until those signals have been processed by the SDR and computer, and the transceiver. So, perhaps one or more of the jacks are inputs for audio? Clarification would be appreciated. Best Regards, Thank you

A:

SDR can receiverd audio input. http://myosuploads3.banggood.com/products/20210407/20210407205257SDR.pdf

SDR can receiverd audio input. http://myosuploads3.banggood.com/products/20210407/20210407205257SDR.pdf

Answered by Snoutwolf23 on 20/10/2021Helpful (0)
0

Q:
Can the RX be connected to the radio and the SDR at the same time?

Can the RX be connected to the radio and the SDR at the same time?
Can the RX be connected to the radio and the SDR at the same time?

A:

Yes,

Yes,

Answered by Egghead1 on 05/10/2021Helpful (0)
0

Q:
A schematic drawing that shows the internal wiring would be very velcome.

A schematic drawing that shows the internal wiring would be very velcome.
A schematic drawing that shows the internal wiring would be very velcome.

A:

Unable to disassemble

Unable to disassemble

Answered by Gamophobia on 05/10/2021Helpful (0)
0

Q:
Does this device fully protect the SDR by isolating the SMA connector and grounding it?

Does this device fully protect the SDR by isolating the SMA connector and grounding it?
Does this device fully protect the SDR by isolating the SMA connector and grounding it?

A:

YES

YES

Answered by Ateliosis on 22/07/2021Helpful (0)
0

Q:
Where is the instruction manual and schematic diagram for this product

Where is the instruction manual and schematic diagram for this product
Where is the instruction manual and schematic diagram for this product

A:

Istruction and full schematisk absolut neccary.

Istruction and full schematisk absolut neccary.

Answered by BG617171619 on 14/01/2021Helpful (0)
0

Q:
How do you make it work on vhf/uhf

How do you make it work on vhf/uhf
How do you make it work on vhf/uhf

A:

I have 3 of these. All 3 of them show a 4.0 swr. These are un usable on VHF.

I have 3 of these. All 3 of them show a 4.0 swr. These are un usable on VHF.

Answered by BG131317119 on 10/08/2022Helpful (0)
0

Q:
Which software ?

Which software ?
Which software ?

A:

sorry i have no answer for the question

sorry i have no answer for the question

Answered by CarManBy on 23/02/2022Helpful (0)