1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.
3.Keep your question short and to the point.
Oñemo'ã porãva
Model | 25A | 35A | 45A | 60A | 80A | 120A | ||
Cont. Current/ Burst Current | 25A/100A | 35A/120A | 45A/180A | 60A/320A | 80A/480A | 120A/600A | ||
Motor Type | Sensorless Brushless Motor | |||||||
Suitable Car | 1/24,1/18, 1/16 car | 1/18, 1/16,1/14 car | 1/12.1/10 car | 1/10 car | 1/8 car | 1/8 car | ||
Suitable Brushless Motor | >=12T | >=12T | >=9T | >=9T | >=5.5T | >=3.5 | ||
Resistance | 0.004ohm | 0.003ohm | 0.0014ohm | 0.0007ohm | 0.0005ohm | 0.00035ohm | ||
Battery | 2 cells Lipo 4~6 cells NiMH | 2~3 cells Lipo 4~6 cells NiMH | 2~3 cells Lipo 4~9 cells NiMH | 2~4cells Lipo 4~12cells NiMH | 2~6cells Lipo 4~12cells NiMH | |||
BEC Output | 5V/2A (analog mode) | 5V/2A (analog mode) | 5.8V/3A (switch mode) | 6.1V/3A (switch mode) | ||||
Dimension | 25*30*14.5mm | 25*30*18.5mm | 32.5*34*24mm | 41*51*36mm |
8. Connector:4.0 T PLUG
Program Method
1. Connect BEC wires with the programmer then turn on the ESC.(80A,120A press the keys to be not put)
2. The Green LED flashes for 2 times then LED off, that is, the connecting programmer with ESC is successful, and the Red LED on presents the current value of that item. Otherwise, the connecting is failed.
3. Please press the Key u201cu2193inchs to select different programs
4. Please press the Key u201cu2192inchs to select different value of the current program
5. Please press the Key u201cPrograminchs to confirm above selections, the Green LED on immediately and has gone out within 5 seconds, that is, this process is successful.
6. Please press the Key u201cResetinchs to reset the factory setting.
Troubleshooting
1. If after power on, motor canu2019t work, no sound is emitted, please check the connections between battery pack and motor.
2. If after power on, LED flashes, please check the voltage of battery pack, which should be from 5V~13V.
3. If the motor emits a u201cBeep-Beepinchs tone Only, please check all the connections: BEC wires, transmitter and receiver, throttle signal wires, etc.
4. If the car canu2019t be speed up, please check either voltage of the battery pack is too low or the temperature of ESC is too high. If the voltage of the battery pack is too low, please replace the battery pack. If the temperature of ESC is too high, please check all connections.
5. If the car stops suddenly while in working state, please check the motoru2019s connections..
6. If the car runs in the opposite direction, which the transmitter is available, please swap two wire connections between the ESC and the motor.
Package included:
1xESC
A part of the review has been auto-translated.
bought this for my 1:16th brushless converted hbx 16890... shipping was fast and it works like a charm .. I'm waiting on a dumbo receiver and transmitter . I jimmy rigged the wires to snap together without soldering .... this 2445 5400kv. is easily close to 80km ... it ran rooster tails on a 35 amp ESC. can't wait to see how this performs.
gracias y llegó a en muy buen tiempo y en su caja sellada hermética
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
A part of the QA has been auto-translated.